1221 crach sensor side air bag drivers side open circut G179
In the illustration, crash sensor for front side airbag is depicted on the passenger side. Remove bottom B pillar trim. Loosen seat belt, complete removal is not necessary. Remove foam piece below B pillar. Remove two bolts 2 at crash sensor from outside. Disengage tab on yellow connector 3 and disconnect connector. 3 Connector 4 B pillarObserve safety precautions after connecting the battery. If Airbag Malfunction Indicator Lamp (MIL) K75 signals a malfunction after installation, DTC memory must be interrogated, erased and once again interrogated using VAS 5051 tester.I would (and ugg have) r ugg ecommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I’ll be back whenever I need a question answered in a hurry.Stephanie PElm City, NCused your service this weekend with “Trecers” help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 “tracer” fee and $40. ugg 00 for parts, I saved several hundreds of dollers at a shop. i willrecommend you and use you in the future.David L.Richmond, TX9 dollars, 2 hours of my time, and I drove a ugg way. Your diagnosis was right on the mark. Thank you so much.Lurch. Thank you very much.Thank you Geordie, I will not hesitate to contact justanswer in the future!ton, WVAnother great insight to what may be the problem. I willWonderful service, prompt, efficient, and accurate. Couldn’t have asked for more. I cannot thank you enough for your help.